Subscribe to newsletter
Teltonika Networks has placed its entire RUTX router series into End of Life, announced on 3 August 2026. Qualcomm's discontinuation of the CPU platform used across the range has triggered the decision. Distributor ordering closes on 3 February 2027, manufacturing ends on 3 August 2027, and support continues until 3 August 2032. The RUTM and RUTC series are the designated replacement platforms. Existing RUTX deployments remain fully operational and supported, and no immediate action is required.
What Teltonika Has Announced
Every model in the RUTX family is affected, and the cause sits outside Teltonika's control.
The eight products entering End of Life are the RUTX08, RUTX09, RUTX10, RUTX11, RUTX12, RUTX14, RUTX50 and RUTXR1. Teltonika attributes the decision to Qualcomm discontinuing production of the CPU platform on which the series is built, which is a supply chain event.
An End of Life announcement marks the final phase of a product lifecycle, not the end of support. Teltonika has published a five year support window running from the end of production date, and existing units remain covered by its standard EOL policy throughout. The full statement is on the Teltonika Networks newsroom.
The RUTX End of Life Timeline
Four dates matter for anyone with RUTX hardware in service or in a project pipeline.
| Stage | Date | What Changes |
|---|---|---|
| EOL announcement | 3 August 2026 | The series formally enters the End of Life phase |
| End of ordering | 3 February 2027 | Teltonika stops accepting orders for these products |
| End of production | 3 August 2027 | Manufacturing stops |
| Security and bug fixes | To 3 August 2029 | Twenty-four months from end of production, covering security and bug fixes |
| End of support | 3 August 2032 | A further thirty-six months of critical security fixes and best effort support, after which support ends |
Dates confirmed against the Teltonika Networks EOL products register, which carries the definitive lifecycle dates for every product in the programme.
The ordering deadline applies to Teltonika accepting orders. Millbeck holds its own RUTX stock and can continue to supply from that stock after 3 February 2027 for as long as it lasts, so the practical availability window for Millbeck customers extends beyond the headline date and will be project specific.
Replacement Models for Each RUTX Device
Teltonika has mapped every RUTX model to at least one successor, with a single exception.
| RUTX Model | Recommended Replacement |
|---|---|
| RUTX08 | RUTM08 |
| RUTX09 | RUTM09 |
| RUTX10 | RUTM10 |
| RUTX11 | RUTM11, RUTM16 or RUTC16 |
| RUTX12 | RUTC42, RUTM52 or RUTM56 |
| RUTX14 | RUTM50 or RUTM54 |
| RUTX50 | RUTM50 or RUTC50 |
| RUTXR1 | No direct replacement |
The full RUTM and RUTC ranges sit on our Teltonika Networks page, alongside the rest of our industrial router range. The RUTX12 path is worth particular attention, because all three of its named successors are dual modem devices. We have covered how that architecture behaves in practice in Teltonika Dual Modem Routers for IoT.
RUTX, RUTM and RUTC Compared
The two replacement families sit either side of the RUTX on performance, so the right choice depends on what the original device was used for.
| Specification | RUTX | RUTM | RUTC |
|---|---|---|---|
| RAM | 256 MB | 256 MB | 1 GB |
| Flash | 256 MB | 256 MB | 8 GB |
| SoC and architecture | Quad core ARM A7 717 MHz | Dual core MIPS 880 MHz | Dual core ARM A53 1.3 GHz |
| WireGuard throughput | 389 Mbps | 232 Mbps | 616 Mbps |
| OpenVPN throughput | 15 Mbps | 12 Mbps | 44 Mbps |
| IPsec throughput | 89 Mbps | 32 Mbps | 729 Mbps |
| Bluetooth Low Energy | Yes | No | No |
| Wi-Fi generation | Wi-Fi 5 | Wi-Fi 5 | Wi-Fi 6 |
Figures as published by Teltonika Networks. Throughput results depend on test conditions, cipher selection and traffic profile, treat them as a comparison between series rather than a guarantee for any individual site.
The RUTC line is the newer platform of the two, built around 5G RedCap and a different hardware generation. If you are unfamiliar with it, we have a full explainer in Teltonika Platform C and the RUTC Router Platform Explained.
What the Specifications Mean for Your Migration
A like for like model swap is not always a like for like performance swap, and two details are worth checking before you standardise on a replacement.
VPN Throughput Is Not Uniformly Higher
On Teltonika's own published figures, the RUTM series records lower VPN throughput than the RUTX it replaces.
WireGuard drops from 389 Mbps on RUTX to 232 Mbps on RUTM, and IPsec drops from 89 Mbps to 32 Mbps. The RUTC series is comfortably ahead of both. If a site is running an always on tunnel back to a central network and the router is the bottleneck, RUTC is the safer specification. Where the tunnel carries modest telemetry and the connection speed is the limiting factor, RUTM is the value choice and the difference will not be visible in service. Our knowledge base covers how to size a router against a workload if you are working this through from first principles.
Bluetooth Low Energy Is Not Carried Over
Teltonika's comparison shows BLE present on the RUTX series and absent from both replacement families.
If you use BLE for sensor collection, asset tagging or field provisioning, confirm the capability on the specific successor model before you place a standardising order.
Speak with your Millbeck account manager.
What to Do Now
The practical priority is separating what is already deployed from what is still to be specified.
- Existing installations. No action is required. Units continue to operate and remain supported to 3 August 2032.
- New projects and site expansions. Specify a RUTM or RUTC model now, so you are not designing in a device with a fixed support horizon.
- Standardised estates. If you hold a single approved model on an internal build standard, start the approval process for its successor rather than waiting for the ordering deadline.
- Contracted volumes. If you have delivery commitments that run past 3 February 2027, raise them now so a supply plan can be agreed while options remain open.
- Firmware and configuration. RutOS configurations do not always transfer cleanly between hardware series. Plan a test build before a rollout, then lock the working settings down as a single configuration we apply to every replacement unit before despatch.
- Remote management. If the estate is enrolled in Teltonika RMS, factor device re-enrolment into the migration plan.
How Millbeck Can Help
Millbeck is a Teltonika Diamond Partner and has supplied cellular connectivity hardware in the UK since 2008.
We hold UK stock of both the outgoing RUTX range and the RUTM and RUTC replacements, we can support a phased transition rather than a hard cutover. Our team can advise on the right successor for a given deployment, supply pre configured units through our router configuration service, and help with RMS enrolment and IoT SIM provision at the same time. If you are running a standardised estate and need a considered migration path, get in touch and we will work through it with you.
Frequently Asked Questions
Do I need to replace my existing RUTX routers?
No. Teltonika has confirmed that deployed RUTX units continue to operate normally and remain covered under its EOL policy. Support runs to 3 August 2032, which gives most estates a full replacement cycle to plan against.
When is the last date I can buy a Teltonika RUTX router?
Teltonika stops accepting orders on 3 February 2027 and stops manufacturing on 3 August 2027. Millbeck can continue to supply from its own UK stock after the Teltonika ordering deadline while stock lasts. Contact us for current availability against a specific model.
Why is the RUTX series being discontinued?
Teltonika has attributed the decision to Qualcomm discontinuing production of the CPU platform that powers the series. It is a component availability decision rather than a reflection on the products.
Which model replaces the RUTX50?
Teltonika recommends the RUTM50 or the RUTC50. The RUTC50 offers higher VPN throughput, more memory and Wi-Fi 6, while the RUTM50 sits at a lower price point. The right choice depends on whether VPN performance or cost is the greater constraint at the site.
Will RUTX routers still receive software updates?
Yes, for a defined period. Teltonika provides security and bug fixes for twenty-four months from the end of production date, then critical security fixes and best effort support for a further thirty-six months, ending on 3 August 2032.
Is there a replacement for the RUTXR1?
Teltonika has not named a direct replacement for the RUTXR1. If you have these units deployed, contact Millbeck and we will work through the alternatives based on your form factor, port and mounting requirements.
What is the difference between the RUTM and RUTC series?
The RUTC series is the higher performance family, with 1 GB of RAM, 8 GB of flash, Wi-Fi 6 and substantially higher VPN throughput. The RUTM series matches the RUTX on memory and Wi-Fi generation and sits at a more competitive price point. Both are available across our Teltonika range.
